EVERCOAT Light Speed™ LED Cure 440 Express 118ML
Light Speed™ LED Cure 440 Express is the fast-fix for micro-pinholes that are hard to identify prior to primer application. This patent pending technology is a high-solids polyester that is easy to apply and cures on application of Light Speed LED lamp. Testing has shown that when used properly, up to 90% of all rework created by micro-pinholes are eliminated.
Application
If excess material builds up on the repair area, lightly sand with P320 grit or finer after cured to remove any excess product prior to applying primer.
NOTE: Use UV-A LED Lamp rated at wavelength of 395nm and min. irradiance of 30 mW/cm2 for
proper cure
(i) All tests were conducted using a SCANGRIP® UV-GUN
IMPORTANT SAFETY INFORMATION. The use of equipment not recommended by the manufacturer or contrary to the instructions may cause an unsafe condition.
READ AND FOLLOW ALL SAFETY INSTRUCTIONS with UV/LED curing equipment manufacture
NOTES:
– When using waterborne primers, finish by preparing with a grey Nylon Web, then follow your waterborne coating manufacturer’s recommendation
– 440 Express LIGHT SPEED™ is not designed to replace polyester glazing putties, or recommended for use over conventional bodyfiller.
